The Voltage Sense Alarm is an advanced power monitoring device engineered for environments where uninterrupted 230V AC power is essential. Housed in a robust, weatherproof IP65 enclosure (80mm x 55mm x 55mm), it offers a compact footprint and easy wall or panel installation for seamless integration into mission-critical setups.
| 230V AC Detection: Instantly monitors the presence of main supply voltage. |
| Easy-to-See Indicators: GREEN LED: Illuminates when 230V AC is present. RED LED: Flashes during power outage or disruption. |
| Alarm & Audible Notification: Buzzer: Sounds every 10 seconds if voltage is lost. Acknowledge Function: Silence buzzer for 10 minutes via RED LED. |
| Battery Backup: Operates continuously for 24 hours on in-built rechargeable battery. |
| System Test Feature: Verify operation any time via GREEN LED when not in alarm mode. |
| Rugged IP65 Enclosure: Protects against dust, water, and harsh conditions. |
| Simple Installation: Wall or panel mounting; fits tight spaces. |
| Parameter | Details |
|---|---|
| Supply Sensed | 230V AC |
| Power | 8 Watts |
| Enclosure Protection | IP65 / Glass fuse 100 mA |
| Dimensions | 80mm x 55mm x 55mm |
| Indicators | GREEN LED (Power ON), RED LED (Alarm) |
| Alarm Output | Buzzer: 10s interval (acknowledge/silence) |
| Battery Backup | 24 hours (rechargeable, in-built) 600 mAh |
| Test Function | Via GREEN LED |
| Mounting | Wall or Panel |
| Simple Installation Steps: |
| Each step uses simple actions and checks so anyone can quickly and safely install the device. Make sure to take all necessary safety precautions and ensure the power supply is switched off during installation. |
| 1. Find the arrow on the back of the device; use a pointed object to press the switch in the hole. The RED LED will light up and there will be a beep, showing the device is activated. |
| 2. Attach the device securely to the wall, panel, or switchboard using the eyelets provided on the box. |
| 3. Connect the two wires on the device to a 230 volt power supply and neutral. |
| 4. After connection, the GREEN LED lights up and the RED LED turns off, showing the device is ready. |
| 5. To test, press the GREEN LED once. The RED LED will light up and beep, confirming the device works properly. |